Power Probe (PWPPPKIT03)

Powerprobe Master Test kit
Power Probe Master Test Kit
Mfg: Power Probe
Part No: PPKIT03
Item Number: PWPPPKIT03
Out of stock
MSRP: $379.95
Price: $203.99
free shipping

Features and Benefits:

This Diagnostic Kit is well balanced to work on all 12-24VDC systems.

  • Supplies Power and Ground
  • Digital Voltmeter with Min/Max Voltage Capturing
  • LED's Indicate Direction to a Short Circuit
  • Tone Signal Injection & Wireless Tracing
  • Various Lengths 10 Gauge Leads and 4mm Gold Plated plugs & jacks
  • PNLS020A Included
  • Portable Blowmold Storage Case
  • Gold Plated Connections
  • Multi Strand Flexible Insulated Test Leads
  • Standard Stackable 4mm Banana Plugs
  • 8 -28 gauge cable piercing probes
  • Includes:
    • Power Probe III Circuit Tester (PP319FTC)
    • Open/Short Circuit Detector (ECT2000)
    • Gold Series Lead Set (PPLS01)

Power Probe III Circuit Tester

With the press of a switch you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits without re-polarizing hook-up clips. Locate shorts without wasting fuses.

The 20ft. lead will allow you to test bumper-to-bumper without jumper leads. Audio tone indicates positive with a high pitched tone and negative with a low pitched tone. The audio feature can be disabled when testing relays. The Power Probe III has 2 cool white LEDs that flood the work area with bright light. The housing is sleek and feels great in your hand.

Features and Benefits:

  • Power Up Components
  • Audio Tone
  • Voltmeter
  • 12 - 24 Volt Range
  • 20ft. Jumper Lead Set
  • Bad Ground Indicator
  • Continuity Tester
  • Short Circuit Indicator
  • Relay and Component Tester


  • Maximum Voltage on Probe Tip: +/- 200 Volts Relative to the Negative Battery Clip
  • Probe tip resistance to ground 130KO Computer Safe: 0.1mA floating tip. Voltage range: 12-24v

  • Power Probe Mode (Mode 1)
    • DC Voltage Measurement: 0 to 70 Volts (in 1/10th increments)
    • AC Voltage Measurement: 0 to 70 Volts Peak to Peak(See Peak to Peak & Threshold Setting Mode 5)
    • Square Wave Input Response: 15 Hz to over 500KHz
    • Sine Wave Input Response: 35 Hz to over 250KHz
    • Continuity to Ground: Greater than 20K Ohms - Display is Blank
    • Less than 20K Ohms: Display reads 0.0
    • Less than 2K Ohms: Display reads 0.0 and Green Led is On

  • Min (Mode 2) & Max (Mode 3)
    • Voltage Measurement: 0 to 70 Volts
    • Single Event Capture: Less than 200 Micro Second Pulse Width
    • Repetitive Events: Less than 1 Micro Second Pulse Width

  • Peak to Peak Mode (Mode 4)
    • 0 to 70 Volts P-P
    • Square Wave Input Response: 4 Hz to over 500KHz
    • Sine Wave Input Response: 4 Hz to over 250KHz

  • Peak to Peak Mode Threshold Setting (Mode 5)
    • 0.2, 0.5, 1, 2, 5, 10 & 50 When the Peak to Peak Voltage on theProbe Tip exceeds this threshold then the display is Peak to Peak AC rather than DC.
    • Storage temperature: -40°C (-40°F) to 70°C (158°F)
    • Operating temperature: -20°C (-4°F) to 60°C (140°F)

  • Circuit Breaker
    • 8 amp thermal response - manual reset
    • 8 amp=No trip
    • 10 amps=20 min.
    • 15 amps=6 sec.
    • 25 amps=2 sec.
    • Short circuit=0.3 sec.

  • AMP Ratings for Probes, Leads and Adapters
    • 1, 3, 6' Leads: 30 amps
    • Alligator Clip Lead: 20 amps
    • Male-Male Adapter: 30 amps
    • Female-Female Adapter: 30 amps
    • Small Piercing Probe: 10 amps 20-28 Gauge
    • Large Piercing Probe: 20 amps 8-18 Gauge
    • Power Probe Tip: 30 amps

Open/Short Circuit Detector

The ECT2000 is a Smart Transmitter and Receiver for tracing and locating open and short circuits. Includes Bulb Adapters, Back Probe, Blade Probe, Piercing Probe, Alligator Clip Adapter, Universal with 4mm plug and 2 AAA batteries.

Features and Benefits:

  • Tone Signal Injection & Wireless Tracing
  • LED's Indicate Direction to a Short Circuit
  • 20 Foot Power Lead (Transmitter Only)
  • LED Open Circuit Indicator
  • Toggle Tone to Indicate Circuit's Change of State
  • Hand Held
  • Powered by Vehicle Battery
  • LED Open Circuit Indicator
  • Toggle Tone to Indicate Circuit's Change of State
  • Includes: Tail Light, Brake light and Wedge Style Light Bulb Adapters; Large and Small Self Centering Piercing Probes

Gold Series Lead Set

This lead set kit contains 10 gauge current carrying leads with standard 4mm banana jack adapters for use with all testers, meters and diagnostic equipment.

Features and Benefits:

  • 1', 3', 6' - 10 gauge current carrying test leads
  • Standard 4mm gold plated banana plugs and jacks
  • Male/Male & Female/Female adapters
  • 3 Inch Probe Tip with Standard 4mm Banana Plug
  • Stackable Multi Strand Leads
  • Includes: 1 ft., 3 ft. and 6ft 10 gauge test leads, large & small piercing probes, 3" probe tip, M/M & F/F adapters and upgrade tip adapter for Power Probe I & II