Midtronics (MIDGR81200AMPKIT)

Multi-tasking Battery & Electrical Diagnostic Station
Mfg: Midtronics
Part No: GR8-1200AMPKIT
Item Number: MIDGR81200AMPKIT
In stock: Yes
MSRP: $4,831.67
Price: $2,599.98
free shipping
As Low As $76.56* per month
with $0 Down for 60 months
*Before sales tax; WAC; See terms and options.

Features and Benefits:

The GR8-1200 Multi-tasking Battery and Electrical DiagnosticStation combines the diagnostic charging expertise of theGR8 with EXP Battery and Electrical System Diagnostics tocreate a complete, flexible and expandable diagnostic station.

The GR8-1200 features the new Multi-tasking Bridge, whichallows the user to perform battery and electrical diagnosticson other vehicles while the charger is in use. That meansyou can now more effectively multi-task in the garage andget more value out of one complete diagnostic station.

Simply connect the test clamps to perform a full battery and electrical system analysis. If the battery needs charging,connect the charger clamps and the GR8 takes over.

If you have more work to do while the battery is being charged, remove the EXP-1200 controller from the cart and take it to work on the other side of the garage. When the GR8 finishes the job, the Multi-tasking Bridge provides LED and audible alarms so that you can wirelessly send the results from the bridge to the controller to view or print.

GR8-1200 Provides:
Wireless Multi-tasking
EXP Battery and Electrical Diagnostic Capability
GR8 Diagnostic Charging Functionality

    GR8 Diagnostic Charging Functionality Diagnostic Charging Mode
  • Quickly assesses deeply discharged batteries and recharges only the good ones
  • Combines Dynamic Conductance Technology with advanced charge control to provide fast and accurate results
  • MOSFET Soft Switch Charging Technology
  • Integrated temperature sensor improves safety and diagnostic charging capabilities
  • Isolated load test capabilities allow testing and charging of small and large batteries
  • Recovery charge mode helps recover hard-to-charge batteries
  • Top-off charging lets you trickle charge batteries when desired
  • Multiple diagnostic/charging algorithms including AGM/spiral batteries ECM - Power Supply Mode
  • Tests and maintains battery voltage at 13.5 volts for reliable ECM reprogramming and to maintain the battery during complex diagnostics Jump-start Mode
  • Provides boost charge and 245 amp automated Jump-start routine Manual Mode
  • User-defined charging parameters
    EXP Battery and ElectricalDiagnostic Capability
  • Dynamic Conductance Battery Testing Technology - Combines directtemperature measurement with deep scan technology to improve diagnostics
  • Advanced Electrical System Diagnostics Featuring Digital Signal Processing (DSP) - Provides the ability to analyze the amplitude level and frequency of the ripple pattern for improved accuracy and identification of open or shorted diodes and open-phase conditions
  • DMM Functionality for Advanced Diagnostics - AC/DC Volts, Volts/Amps mode, Temperature, Ohm meter, AC/DC Amps, Scope mode, Diode test
  • Patented Conductance Cable Drop Test - Interactive test routine using dual cable sets for more effective analysis of voltage drop across ground circuit, starter system and alternator system, or more generic system testing
    Wireless Multi-Tasking
  • Multi-tasking means having full electrical diagnostics available for other vehicles while another diagnostic charger function is in process. When a battery is discovered that needs charging, simply connect the charger clamps and the diagnostic charge engine will complete the job. Remove the controller to perform electrical diagnostics on other vehicles while the charging/ power supply functions are already in use. When the charging session is done, you can upload the session results wirelessly from the diagnostic charge engine to the controller for review or printing.
    Maximum Service Flexibility
  • Combines full EXP and GR8 functions with wirelessmulti-tasking to provide the maximum flexibilityand efficiency. Allows the user to quickly and easilyperform all battery and electrical diagnostics.
  • Applications: 12 volt batteries; 12+24 volt charging systems
  • Battery Test Leads: 10 removable with Kelvin clamps
  • Charger Leads: 6 removable Heavy Duty Kelvin Charge Clamps
  • Display: 128 x 64 pixel graphics, backlit display
  • Battery Test Range For 12 volt batteries: 100-3000 CCA 100-1000 A (DIN); 100-3000 CA 100-3000 A (SAE); 100-3000 MCA 100-1000 A (IEC); JIS by Number 100-3000 A (EN)
  • Charging Voltage: Up to 17 volts, 0.1V resolution (12 volt batteries)
  • Charging Current: 0-60 amps, 1 amp resolution; 80 amps peak; 245 amps for cranking assistance (jump start)
  • Temperature Measurement: EXP IR Sensor: -20 200 F; Charger Clamp Sensor: -20 200F
  • Power Inputs: (charger) 110V, 60 Hz, 15-amp dedicated circuit
  • Operating Temperature: 32 F 120 F (0 49 C)
  • Charger: CUL Listed
  • Languages: English, French Canadian, Spanish
  • Shipping Package: 30” x 30” pallet; 42” tall; 110 lbs
  • EXP controller
  • GR8 Diagnostic Charger with built-in cart
  • Integrated Printer
  • Wireless Multi-tasker
  • (2) Serial Cables
  • Charging Cables
  • 10 Test Cables
  • Amp Clamp
  • Stud Adapters

California Proposition 65

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov