Atlas (ATEXH9KOHX) 9KOH Overhead 9,000 lb. Capacity 2-Post Lift
Product Information
The Atlas® 9KOH can be adjusted to two different height settings: 11' 6" or 11' 10"
The Atlas® 9KOH is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price.
The Atlas® 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.
The Atlas® 9KOH includes: an 8 piece set of solid peg type truck adapters, mounting hardware, a set of sliding arm adapters, and a 220 volt single phase power unit that can be mounted on either side of the lift. (The power unit column must be on the correct side).
The Atlas® 9KOH two post chain over roller lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.
Click here to see what other customers think about the Atlas® 9KOH!
We have hydraulic oil in stock!
Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Capacity | 9,000 LB. | ||||||||||||||||||||||
Lifting Time | Ask Your Salesperson | ||||||||||||||||||||||
Overall Height | 142" (11' 10") or 138" (11' 6") | ||||||||||||||||||||||
Overall Width | 141" (11' 9") (With Power Unit) 134¼" (11' 2¼") | ||||||||||||||||||||||
Outside Column To Outside Column | 124 5/8" (10' 4 5/8") | ||||||||||||||||||||||
Maximum Lift Height (Without Adapters) | 74" (6' 2") | ||||||||||||||||||||||
Maximum Lift Height (With Adapters) | 80¼" (6' 8¼") | ||||||||||||||||||||||
Padded Bar Height | 136" (11' 4") or 132" (11') | ||||||||||||||||||||||
Minimum Arm Height | 4" | ||||||||||||||||||||||
Inside Column | 109¾" (9' 1¾") | ||||||||||||||||||||||
Column Size | 7¼" x 11 ?" | ||||||||||||||||||||||
Drive Thru Symmetric/Asymmetric Arm Configuration | 100" (8' 4") 90½" (7' 6½") | ||||||||||||||||||||||
Base of Lift | 14¼" x 18" | ||||||||||||||||||||||
Column Thickness of Steel | 5mm | ||||||||||||||||||||||
Carriage Thickness of Steel | 6mm | ||||||||||||||||||||||
Arms Thickness of Steel | 6mm | ||||||||||||||||||||||
Cable Diameter | .375" | ||||||||||||||||||||||
Motor/Electrical Requirement | 220V single (1) phase. A 30 amp breaker is required. | ||||||||||||||||||||||
Oil Requirement | 3-5 Gallons AW32/AW46 | ||||||||||||||||||||||
Shipping Weight | 1,450 LB. | ||||||||||||||||||||||
Requires a minimum of 4" of concrete with 3000 psi. |
- 9,000 LB. Capacity
- Light Commercial Grade
- "Padded" Shut-Off Bar
- Asymmetric/Symmetric Arms
- Clear Floor Design
- Powder Coat Finish
- Dual Hydraulic Chain-Drive Cylinders
- Dual Point Lock Release
- Secondary Lock System (SLS)
- Free 8 Piece Truck Adapter Set
- Mounting Hardware Included
- Shipping Weight: 1,450 lbs.
- 2 Post Secondary Lock System
- Automatic Arm Restraint
- Chain-Over-Roller Cylinder Configuration
- Electrical Requirements
- Overhead Configuration
- 2 Year Structural/2 Year Hydraulic Limited Warranty
- Bleeding The Cylinders On A Chain-Over-Roller Style Lift
- Financing Available
- How The 9KOH Is Shipped Or Picked Up
- Shipping Information
- The Atlas® Brand
- We Stock The Parts
The Atlas® 9KOH can be adjusted to two different height settings: 11' 6" or 11' 10"
The Atlas® 9KOH is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price.
The Atlas® 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.
The Atlas® 9KOH includes: an 8 piece set of solid peg type truck adapters, mounting hardware, a set of sliding arm adapters, and a 220 volt single phase power unit that can be mounted on either side of the lift. (The power unit column must be on the correct side).
The Atlas® 9KOH two post chain over roller lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.
Click here to see what other customers think about the Atlas® 9KOH!
We have hydraulic oil in stock!
Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Specifications
Capacity | 9,000 LB. | ||||||||||||||||||||||
Lifting Time | Ask Your Salesperson | ||||||||||||||||||||||
Overall Height | 142" (11' 10") or 138" (11' 6") | ||||||||||||||||||||||
Overall Width | 141" (11' 9") (With Power Unit) 134¼" (11' 2¼") | ||||||||||||||||||||||
Outside Column To Outside Column | 124 5/8" (10' 4 5/8") | ||||||||||||||||||||||
Maximum Lift Height (Without Adapters) | 74" (6' 2") | ||||||||||||||||||||||
Maximum Lift Height (With Adapters) | 80¼" (6' 8¼") | ||||||||||||||||||||||
Padded Bar Height | 136" (11' 4") or 132" (11') | ||||||||||||||||||||||
Minimum Arm Height | 4" | ||||||||||||||||||||||
Inside Column | 109¾" (9' 1¾") | ||||||||||||||||||||||
Column Size | 7¼" x 11 ?" | ||||||||||||||||||||||
Drive Thru Symmetric/Asymmetric Arm Configuration | 100" (8' 4") 90½" (7' 6½") | ||||||||||||||||||||||
Base of Lift | 14¼" x 18" | ||||||||||||||||||||||
Column Thickness of Steel | 5mm | ||||||||||||||||||||||
Carriage Thickness of Steel | 6mm | ||||||||||||||||||||||
Arms Thickness of Steel | 6mm | ||||||||||||||||||||||
Cable Diameter | .375" | ||||||||||||||||||||||
Motor/Electrical Requirement | 220V single (1) phase. A 30 amp breaker is required. | ||||||||||||||||||||||
Oil Requirement | 3-5 Gallons AW32/AW46 | ||||||||||||||||||||||
Shipping Weight | 1,450 LB. | ||||||||||||||||||||||
Requires a minimum of 4" of concrete with 3000 psi. |
Features
- 9,000 LB. Capacity
- Light Commercial Grade
- "Padded" Shut-Off Bar
- Asymmetric/Symmetric Arms
- Clear Floor Design
- Powder Coat Finish
- Dual Hydraulic Chain-Drive Cylinders
- Dual Point Lock Release
- Secondary Lock System (SLS)
- Free 8 Piece Truck Adapter Set
- Mounting Hardware Included
- Shipping Weight: 1,450 lbs.
- 2 Post Secondary Lock System
- Automatic Arm Restraint
- Chain-Over-Roller Cylinder Configuration
- Electrical Requirements
- Overhead Configuration
- 2 Year Structural/2 Year Hydraulic Limited Warranty
- Bleeding The Cylinders On A Chain-Over-Roller Style Lift
- Financing Available
- How The 9KOH Is Shipped Or Picked Up
- Shipping Information
- The Atlas® Brand
- We Stock The Parts
Size: | Pages: | ||
Atlas® 9KOH Manual | 1.3 MB | 37 | View |
Atlas® 9KOH Overhead Shut Off Bar Limit Switch Wiring Guide | 2.9 MB | 1 | View |
Atlas® 9KOH Cylinder Bleeding Procedure (Do this immediately after installation) | 144 KB | 2 | View |
Bleeding The Cylinder On A Direct Drive Cylinder Lift
Do this before you put a vehicle on your lift.
Bleeding The Cylinder On A Chain-Over-Roller Style Lift
Do this before you put a vehicle on your lift.
Can I Mount The Power Unit On Any Column?
NO…but YES. Most lifts have only one column that can be used to mount the power unit.
This column has the mounting bracket. Make sure that you install that specific column on the side where you want to locate the power unit.
How To "Adjust" An Atlas Overhead Two Post Lift To Fit In Your "Vertically Challenged" Garage
Ceiling height an issue? Learn how to make an Atlas 2-post overhead lift "shorter" than the factory's recommended height.
Before You Buy A Lift Checklist
A checklist of things that you should know and do before you purchase a lift.
How Does a 2-Post Above Ground Lift Work?
Learn how a 2-post above ground lift works.
How To Destroy Your Two Post Lift
Find out how you can destroy your 2 post by not using it properly.
2-Post Lifts vs. 4-Post Lifts
View the comparison between 2-post car lifts and 4-post car lifts.
Reviews
15 reviews
9k atlas wheel wheel lift
by anonymous
I ordered this car lift on Friday and on Tuesday I received it I have not opened up yet.
Great Lift
by anonymous
Very straight forward directions for install. With 2 guys and a little bit of time wasn't bad at all to get going. Works great and no issues. I would recommend if you're looking for a good lift at a great price.
carcrazy
by anonymous
just got two lifts and i am very happy
A+ seller and business! Fantastic customer service and sales
by anonymous
I purchased this lift a year ago and figured id wait 1 year to see how it holds up against ALL of the use and abuse a person puts these through. I would have to say im VERY impressed with this lift and its capabilities. Anyone who is complaining about this company is just a hiccup in the business as there will ALWAYS be a person who isnt happy with something but i have had multiple people tell me about this company and so i went and purchased their product myself and I am extremely pleased with it and their customer service! Keep up the good work guys and will be back for more of your products!!!
Fantastic customer service
by anonymous
I’ve had this same lift for over 5 years in my home garage . I do work on most weekends and this lift has met my needs and then some ! Fantastic customer service as well when I picked it up @ the Delaware location.
Great lift
by anonymous
I had this lift for years and never had an issue. Assembly was pretty easy, definitely recommend a helper. Minimal final adjustments to "fine tune" it. I did have a switch issue one month in but Greg Smith sent out a new one in a day or so. Building a new garage this year and will buy this model again.
Great lift buying another one
by anonymous
My wife purchased this for me several years ago and my friends and I used it all the time. We never had any issues with it at all. I liked it so much I am planning on purchasing for my new garage.
Great lift
by anonymous
I purchased this lift for my last garage and we used it hard. We never had an issue with it at all. I am currently in the planning stages of building a new garage and its being designed to accommodate another 9KOH lift.
Happy customer
by anonymous
I bought this lift 6 years ago and it still works great, I have had no problems. I would highly recommend this lift. Very happy
Great lift
by anonymous
This is a great lift for the price. More hardware than needed. The bracket that holds the hose out of the way of the ram doesn't exactly fit. So I just zip tied mine away. Lifts everything with ease. Easy install and adjustment.
Nice Lift, Awful Instructions
by anonymous
Nice lift for the price. The installation instructions where very very bad........... There were parts not even shown in the instructions. so you just assume where they go. It was not straight forward at all and i'm a mechanical engineer. Pretty much keep installing pieces and use process of elimination.
Quality at an affordable price
by anonymous
I have had this lift for 8 years and love it to this day. I have had everything on it from dirt bikes, tractors, mowers, jetski, to extended cab SuperDuty diesels weighing 8000#. I've even lifted a boat from its trailer with careful balancing position of the arms. The bigger trucks do wobble a bit due to the flexing of the arms but the jack stands available at Greg Smith Equipment take care of that, one at each end of truck. Sometimes it stores a vehicle on it with another classic car under it and I have no worries about it. Quality lift for the money in my book.
Love it!
by anonymous
Had this lift for 4 years now and love it! Would strongly recommend to anyone.
Fantastic find
by Jimmy
purchased this lift first of Oct and received in two weeks--up and running! Awesome purchase. Works great!!
Best money I’ve spent in my workshop!
by Eldon
I’ve had this lift for 6 years now and it’s been fantastic. I don’t have a single complaint or issue with it at all. I’ve had a 2004 Chevy 2500 diesel 4x4 and 1990 F-250 4x4 on it without a single worry. I use it for restoration work on my 1957 Chevy and 1960 Pontiac mostly. It’s the best investment I’ve done in my auto workshop!