Atlas® 412A 12,000 LB. Alignment Lift

SKU:ATEATTD412A
MPN: ATTD-412A
(0) No Reviews yet
View Product Video
EXCESS SHIPPING REQUIRED ITEM
To receive an estimate on shipping charges and required unloading equipment prior to purchase, please contact an Atlas Expert.
Dial (800) 794-6793 option 1
$7,999.00
Out of Stock

Product Information

The Atlas® 412A 12,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® alignment lifts offer many exclusive features not found on many other competitor's lifts. Each Atlas® 412A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway. There is also an air line kit ($300 value) included. The slip plate package is built into the runways.

Drive through ramps are available as an option.

The Atlas® 412A (12,000 LB. capacity alignment lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 412A is tested to ensure that this alignment lift system will perform flawlessly at its rated capacities. The Atlas® 412A has been manufactured to the same exacting specifications for many years.

The Atlas® 412A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an "old style" chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to "level" properly and the exposed hydraulic cylinder is responsible for numerous "door dings".

California Residents - Proposition 65 Warning

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Atlas® 412A Alignment Lift
Capacity 12,000 LB.
Lifting Height76 1/4" (6' 4 1/4")
Overall Width of Columns (Without Motor)126" (10' 6")
Overall Width of Columns (With Motor)135" (11' 3")
Overall Length with Approach Ramps 230" (19' 2")
Overall Length without Approach Ramps200" (16' 8")
4-Wheel Alignment Wheelbase

Maximum 154 in.
Minimum 82 in.

2-Wheel Alignment WheelbaseMaximum 157 in.
Length Between Columns184 ¼" (15' 4 ¼")
Runway Length186 ½" (15' 6 ½")
Runway Width22" (1' 10")
Thickness of Runway 7 3/4"
Width Between Runways44 ½" (3' 8 ½")
Width Between Runway Rails42" (3' 6")
Outside Runway to Outside Runway84 ¾" (7' ¾")
Clearance Under Runways68 1/2" (5' 8 1/2")
Column Dimension7" x 5"
Base of Column10 1/8" x 9"
Clearance Between columns112 ¼" (9' 4 ¼")
Height of Columns82" (6' 10")
Maximum Wheel Base175" (14' 7")
Drive Thru98 ½" (8' 2 ½")
Cable Diameter1/2"
Motor 2 HP, 220 Volt, Single phase
Oil Requirement3-5 Gallons AW32/AW46
Shipping Weight 2,700 LBS.
The Atlas® 412A 12,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® alignment lifts offer many exclusive features not found on many other competitor's lifts. Each Atlas® 412A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway. There is also an air line kit ($300 value) included. The slip plate package is built into the runways.

Drive through ramps are available as an option.

The Atlas® 412A (12,000 LB. capacity alignment lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 412A is tested to ensure that this alignment lift system will perform flawlessly at its rated capacities. The Atlas® 412A has been manufactured to the same exacting specifications for many years.

The Atlas® 412A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an "old style" chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to "level" properly and the exposed hydraulic cylinder is responsible for numerous "door dings".

Specifications

Atlas® 412A Alignment Lift
Capacity 12,000 LB.
Lifting Height76 1/4" (6' 4 1/4")
Overall Width of Columns (Without Motor)126" (10' 6")
Overall Width of Columns (With Motor)135" (11' 3")
Overall Length with Approach Ramps 230" (19' 2")
Overall Length without Approach Ramps200" (16' 8")
4-Wheel Alignment Wheelbase

Maximum 154 in.
Minimum 82 in.

2-Wheel Alignment WheelbaseMaximum 157 in.
Length Between Columns184 ¼" (15' 4 ¼")
Runway Length186 ½" (15' 6 ½")
Runway Width22" (1' 10")
Thickness of Runway 7 3/4"
Width Between Runways44 ½" (3' 8 ½")
Width Between Runway Rails42" (3' 6")
Outside Runway to Outside Runway84 ¾" (7' ¾")
Clearance Under Runways68 1/2" (5' 8 1/2")
Column Dimension7" x 5"
Base of Column10 1/8" x 9"
Clearance Between columns112 ¼" (9' 4 ¼")
Height of Columns82" (6' 10")
Maximum Wheel Base175" (14' 7")
Drive Thru98 ½" (8' 2 ½")
Cable Diameter1/2"
Motor 2 HP, 220 Volt, Single phase
Oil Requirement3-5 Gallons AW32/AW46
Shipping Weight 2,700 LBS.

Features

  • Automatic Shut Off Switch
  • Air Operated Lock Release
  • 412A Installation
  • 5 Year Structural & 2 Year Hydraulic Warranty
  • Accommodates A Wide Variety Of Wheelbases
  • Air Line Kit Included In Combo Package
  • Built-In Slip Plates
  • CE Tested And Approved
  • Electrical Requirements
  • Includes Turntables
  • Lock Ladder Column Design
  • Optional Front Extension Kit
  • 4 Post Lift FAQ
  • Atlas® 4 Post Lift Comparison Guide
  • Bleeding The Cylinder On A Direct Drive Cylinder Lift
  • Minimum Wheel Base Defined
  • Financing Available
  • How Does Hydraulic Cylinder Rust Form
  • How Tall Does My Ceiling Need To Be
  • Shipping Information
  • The Atlas® Brand
  • We Stock The Parts
  • Why Should I buy A Certified Car Lift?
  • Are You Ordering Your Shop Equipment From This Guy?
  • What's the Best Hydraulic Oil for My Lift
  • Which Lift is Right For You?
  • California Residents - Proposition 65 Warning

    WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

    Size:Pages:
    Atlas® 412A Manual(ATTD-412A)2.3 MB50View
    Atlas® 412A Manual(ATPK-412A-KIT)3.8 MB47View
    Electrical Wiring Guide300 KB1View
    Squeaks And Tweaks300 KB1View
    Optional Hose Line Installation Guide280 KB1View
    Atlas® Six Terminal Relay Wiring Guide481 KB1View
    Atlas® Four Terminal Relay Wiring Guide493 KB1View

    Reviews

    No reviews available

    Be the first to review this product

    Write a Review