Atlas® PV-10HP Overhead 10,000 lbs. capacity Adjustable Height 2 Post Lift (EXTRA TALL)

SKU:ATEATPKPV10HPX
MPN: ATPK-PV10HPX
(0) No Reviews yet
$4,789.00
Out of Stock
Ask an Atlas Expert
Have questions or want to place an order by phone?
Dial (800) 794-6793 and select option 1.

Product Information

PV = Professional Value

The Atlas® PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas® has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as “bullet-proof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas® PV series models. GET SERIOUS…GET ATLAS®

The Atlas® PV-10HP is the taller version of the Atlas® PV-10P two post above ground lift. The over head beam (that connects the two columns) is positioned two feet higher than the over head beam on the Atlas® PV-10P. The taller position of the over head beam allows the Atlas® PV-10HP above ground hoist to lift "taller vehicles". The Atlas® PV-10P and Atlas® PV-10HP are capable of lifting a vehicle a full 79". However, some cube vans, "ladder trucks" and other vehicles that are exceptionally tall, cannot be raised to the full lifting height on the Atlas® PV-10P two post above ground hoist. The over head beam on the Atlas® PV-10P two post lift would prevent the "top" of the vehicle to be raised past 11' 8".

The Atlas® PV-10HP includes a two foot extension kit ( longer hydraulic hoses, longer aircraft quality cables, taller beam extensions) that extend the height of the overhead beam (which connects both columns) an additional two feet. (24 inches) Please remember that you must have a ceiling height of fourteen (14) feet to install the Atlas® PV-10HP above ground lift.

The Atlas® PV-10HP weighs approximately 200 LB. more than the Atlas® PV-10P. All other specifications (add 24" to the height specifications) are the same as the Atlas® PV-10P.

We have hydraulic oil in stock!

Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Click here to view photos of our parts department.

California Residents - Proposition 65 Warning

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

Atlas® PV-10HP Specifications
SetupLowHigh
Capacity10,000 LB.10,000 LB.
Lifting TimeAsk Your SalespersonAsk Your Salesperson
Overall Height166" (13' 10")170" (14' 2")
Overall Width137 1/2" (11' 5 1/2")137 1/2" (11' 5 1/2")
Height To Shut Off Bar160" (13' 4")164" (13' 8")
Outside Column to Outside Column125" (10' 5")125" (10' 5")
Maximum Lift Height
(With Adapters)
82" (6' 10")
Maximum Lift Height
(Without Adapters)
71 1/2" (5' 11 1/2")
Minimum Arm Height4 1/2"
Between Columns110" (9' 2")110" (9' 2")
Column Size14 1/2" x 7 1/2"
Column Thickness of Steel6mm
Carriage Thickeness of Steel6mm
Arms Thickness of Steel6mm
Drive Thru
Symmetric/Asymmetric Configuration
96" (8')
90" (7' 6")
96" (8')
90" (7' 6")
Base of Lift17 1/2" x 20 1/2"
Cable Diameter.375"
Cylinder Diameter2.4"
Motor/Electrical Requirement220V +/- 5% (209-231volts) single (1) phase.
A 30 amp breaker is required.
Oil Requirement3-5 Gallons AW32/AW46
Shipping Weight
2,150LB
PV = Professional Value

The Atlas® PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas® has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as “bullet-proof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas® PV series models. GET SERIOUS…GET ATLAS®

The Atlas® PV-10HP is the taller version of the Atlas® PV-10P two post above ground lift. The over head beam (that connects the two columns) is positioned two feet higher than the over head beam on the Atlas® PV-10P. The taller position of the over head beam allows the Atlas® PV-10HP above ground hoist to lift "taller vehicles". The Atlas® PV-10P and Atlas® PV-10HP are capable of lifting a vehicle a full 79". However, some cube vans, "ladder trucks" and other vehicles that are exceptionally tall, cannot be raised to the full lifting height on the Atlas® PV-10P two post above ground hoist. The over head beam on the Atlas® PV-10P two post lift would prevent the "top" of the vehicle to be raised past 11' 8".

The Atlas® PV-10HP includes a two foot extension kit ( longer hydraulic hoses, longer aircraft quality cables, taller beam extensions) that extend the height of the overhead beam (which connects both columns) an additional two feet. (24 inches) Please remember that you must have a ceiling height of fourteen (14) feet to install the Atlas® PV-10HP above ground lift.

The Atlas® PV-10HP weighs approximately 200 LB. more than the Atlas® PV-10P. All other specifications (add 24" to the height specifications) are the same as the Atlas® PV-10P.

We have hydraulic oil in stock!

Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Click here to view photos of our parts department.

Specifications

Atlas® PV-10HP Specifications
SetupLowHigh
Capacity10,000 LB.10,000 LB.
Lifting TimeAsk Your SalespersonAsk Your Salesperson
Overall Height166" (13' 10")170" (14' 2")
Overall Width137 1/2" (11' 5 1/2")137 1/2" (11' 5 1/2")
Height To Shut Off Bar160" (13' 4")164" (13' 8")
Outside Column to Outside Column125" (10' 5")125" (10' 5")
Maximum Lift Height
(With Adapters)
82" (6' 10")
Maximum Lift Height
(Without Adapters)
71 1/2" (5' 11 1/2")
Minimum Arm Height4 1/2"
Between Columns110" (9' 2")110" (9' 2")
Column Size14 1/2" x 7 1/2"
Column Thickness of Steel6mm
Carriage Thickeness of Steel6mm
Arms Thickness of Steel6mm
Drive Thru
Symmetric/Asymmetric Configuration
96" (8')
90" (7' 6")
96" (8')
90" (7' 6")
Base of Lift17 1/2" x 20 1/2"
Cable Diameter.375"
Cylinder Diameter2.4"
Motor/Electrical Requirement220V +/- 5% (209-231volts) single (1) phase.
A 30 amp breaker is required.
Oil Requirement3-5 Gallons AW32/AW46
Shipping Weight
2,150LB

Features

  • FREE 12 Piece Truck Adapter
  • Single Point Lock Release
  • 5 Year Structural & 2 Year Hydraulic Warranty
  • Asymmetric/Symmetric Arm Design
  • CE Tested and Approved
  • Electrical Requirements
  • Overhead Configuration
  • PV-10P Installation
  • 2 Post Lift Frequently Asked Questions (F.A.Q.)
  • Atlas® 2 Post Lift Comparison Guide
  • Bleeding The Cylinder On A Direct Drive Cylinder Lift
  • How To Destroy Your 2-Post Lift
  • Financing Available
  • How To Shorten Your Overhead 2-Post Lift
  • Shipping Information
  • The Atlas® Brand
  • We Stock The Parts
  • Why Should I buy A Certified Car Lift?
  • Are You Ordering Your Shop Equipment From This Guy?
  • What's the Best Hydraulic Oil for My Lift
  • Which Lift is Right For You?
  • California Residents - Proposition 65 Warning

    WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov


    Size:Pages:
    Atlas® PV-10HPX Manual - 3-Hose Configuration3.2 MB53View
    Atlas® PV-10HP Manual - 2-Hose Configuration3.5 MB54View
    Atlas® Overhead Lift Wiring Guide300 KB1View
    Atlas® Overhead Lift Wiring Guide (New Style)2.9 MB1View
    Wiring Guide for TMC-18 Contactor170 KB1View
    Wiring Guide for AMGO Contactor525 KB1View
    Can I Mount The Power Unit On Any Column?

    NO…but YES. Most lifts have only one column that can be used to mount the power unit.
    This column has the mounting bracket. Make sure that you install that specific column on the side where you want to locate the power unit.

    Reviews

    No reviews available

    Be the first to review this product

    Write a Review