Atlas® 414/414A FEK "Front Extension Kit"

SKU:ATEATPK41401
MPN: ATPK-41401
(0) No Reviews yet
$631.96
Out of Stock
Ask an Atlas Expert
Have questions or want to place an order by phone?
Dial (800) 794-6793 and select option 1.

Product Information

In-Store Pick Up Discount Available. Restrictions Apply. Please Call For Details.
Greg Smith Equipment is pleased to introduce the Atlas® Pro 41401 front extension kit. (41401).

The 41401 is designed to add a two foot (24”) extension to the runway lengths on our popular Atlas® 414/414A four post lifts. The Atlas® 414A can accommodate a vehicle with a 175 1/2" (14' 7 1/2") wheelbase, and with the addition of the 41401, the Atlas® 414A can accommodate a vehicle with a 199 1/2” (16’ 7 1/2”) wheelbase.



The 41401 is designed and engineered to “bolt on” to the front of the runways of the Atlas® 414/414A four post lifts. The 41401 extends PAST (in front of) the cross beam. Please be aware that the optional rolling jacks WILL NOT roll past the front crossbeam. If you need to lift the FRONT of the vehicle, make sure that the FRONT lift points of the vehicle will be positioned BEHIND the front crossbeam. (Backing the vehicle onto the lift will eliminate the front crossbeam from being an obstacle for the front rolling jack-but will now affect the “rear” rolling jack---DUH!)
California Residents - Proposition 65 Warning

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

In-Store Pick Up Discount Available. Restrictions Apply. Please Call For Details.
Greg Smith Equipment is pleased to introduce the Atlas® Pro 41401 front extension kit. (41401).

The 41401 is designed to add a two foot (24”) extension to the runway lengths on our popular Atlas® 414/414A four post lifts. The Atlas® 414A can accommodate a vehicle with a 175 1/2" (14' 7 1/2") wheelbase, and with the addition of the 41401, the Atlas® 414A can accommodate a vehicle with a 199 1/2” (16’ 7 1/2”) wheelbase.



The 41401 is designed and engineered to “bolt on” to the front of the runways of the Atlas® 414/414A four post lifts. The 41401 extends PAST (in front of) the cross beam. Please be aware that the optional rolling jacks WILL NOT roll past the front crossbeam. If you need to lift the FRONT of the vehicle, make sure that the FRONT lift points of the vehicle will be positioned BEHIND the front crossbeam. (Backing the vehicle onto the lift will eliminate the front crossbeam from being an obstacle for the front rolling jack-but will now affect the “rear” rolling jack---DUH!)
California Residents - Proposition 65 Warning

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov

The Atlas® 414 14,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. All of our Atlas® lifts offer many exclusive features not found on many other competitor's lifts.

Drive-through off-ramps are available as an option.

The Atlas® 414 (14,000 LB. capacity four post lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 414 is tested to ensure that this lift system will perform flawlessly at its rated capacities. The Atlas® 414 has been manufactured to the same exacting specifications for many years.

The Atlas® 414 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an "old style" chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to "level" properly and the exposed hydraulic cylinder is responsible for numerous "door dings".

We have hydraulic oil in stock!

Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Click here to view photos of our parts department.


Reviews

No reviews available

Be the first to review this product

Write a Review