Atlas Automotive Equipment

Atlas Equipment 12ASL 12,000 lb. Capacity Alignment Scissor Lift

$14,499.00
In stock
SKU
ATEATTD-12ASL-N-FPD
$1.00
Ask an Atlas Expert
Have questions or want to place an order by phone?
Proposition 65 Warning for California Consumers
icon
WARNING: cancer and reproductive harm - www.P65Warnings.ca.gov

Features & Benefits:

  • 12,000 LB. Capacity
  • Commercial Grade
  • Scissor Alignment Lift
  • Built in Slip Plates and Alignment Turntables Included
  • Turntable Covers Included
  • Open Center Design for Easy Access
  • Air-Operated Single Point Lock Release (External Air Supply Required)
  • Airline Kit Included
  • Precise Platform Leveling Accuracy
  • Separate Self-Contained Control Panel
  • Emergency Manual Pump for Lowering
  • CE Certified
  • Can be Surface Mounted or Flush Mounted
  • Mounting Hardware Included
  • 220volt/1phase Electric Operation (Requires a 30amp Breaker)
  • 2 Year Structural/1 Year Hydraulic Warranty
  • Shipping Weight: 5,000 lb.
  • This part number FREIGHT PREPAID

The Atlas® 12ASL 12,000 lb. scissor alginment lift has a lifting height of over seven feet so that it may be floor mounted or recessed in the floor for flush mounting. The full frame under the scissor lift provides for maximum stability.

The separate control panel may be conveniently positioned to allow easy access for the operator. The 220 volt (single phase) electric/hydraulic power unit is housed inside the metal control panel box. The push button controls activate the raising and lowering of the lift. The sophisticated air actuated lock system is automatically engaged and disengaged as the lift is being raised or lowered. The lift has a safety lowering limit switch. Once the lift platforms are lowered to within 10 � inches of the ground, the lift automatically stops its descent. The Down button needs to be released and depressed again to allow the lift to go down completely.

The Atlas® 12ASL has welded rails on the inside of the runways allowing the customer the option of using a rolling jack (such as the Atlas® RJ-6).

Quality workmanship, ease of operation, straight forward installation instructions, a durable powder coat finish and the lowest prices in the industry makes the Atlas® 12ASL 12,000 lb. alignment scissor lift the perfect choice for the demanding and discriminating ship owner. This Alignment System allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dually.

Atlas® 12ASL Specifications

  • Capacity: 12000 lbs
  • Minimum Lift Height: 11 1/2"
  • Maximum Lift Height Above Floor: 84 1/4" (7' 1/4"))
  • Overall Length w/ Ramps: 250" (20' 10")
  • Overall Length w/o Ramps: 197" (16' 5")
  • Overall Width: 86 3/8" (7' 2/ 3/8")
  • Runway Width: 23 3/4"
  • Between Runways: 39"
  • Air Requirement: 85-120 PSI
  • Motor/Electrical Requirement: 220volt +/- 5% (209-231 volts)/1phase 30amp breaker required
  • Oil Requirement: 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
  • Shipping Weight: 5000 lbs

Accessories Available

Runway Extension Kit

Write Your Own Review
You're reviewing:Atlas Equipment 12ASL 12,000 lb. Capacity Alignment Scissor Lift