GM and Chrysler Water Pump/Fan Clutch Pulley Holder
Features and Benefits:
- Used on GM and Chrysler water pump pressed on pulleys
- Designed with billet cormoly bulkhead pins for durability
- Securely holds the water pump while SCH95210 removes fan clutch
- Heat treated
- Comes in a SP HiTek black finish
This specially designed tool is used on vehicles using pressed on pulleys. These pulleys have holes instead of bolt heads for use in securing the pulley from rotating while removing or installing the fan clutch assembly. With the use of a 36 mm open end wrench part #88550, #93260 or #95210 the technician can loosen and tighten the fan clutch on many 1999 and later G.M. trucks, vans, SUV's, many 1998 and later Jeeps, and also many 1998 and later Dodge trucks, vans and SUV's.
The 99800A is used on the following applications:
G.M. 4.8 liter V-8, 5.3 liter V-8 and 6.0 liter V-8 1999 and later.
Chrysler, 3.7 liter V-6, 3.9 liter V-6, 4.7 liter V-8, 5.2 liter V-8, 5.9 liter V-8, 8.0 liter V-10 1998 and later.
Chrysler engines using factory replacement water pumps for the following engines; 3.9 liter V-6, 5.2 liter V-8, 5.9 liter V-8 1993 and later also, 8.0 liter V-10 1997 and later.